ACCURATE ORGAN DOSIMETRY MEASUREMENTS WITH MINIMAL DOSIMETERS
使用最小剂量计进行精确的器官剂量学测量
• Refined and improved version of the Alderson RANDO Phantom
Alderson RANDO 幻影模体精炼和改进版本的
• Approx. 10,000 phantoms in use all over the world for over 30 years
全球约有10,000台幻影设备已使用超过30年
• Contact RSD for Nanodot and OSLD Configuration Pricing
联系RSD了解Nanodot和OSLD配置定价
TLD Dosimeters and Fittings TLD剂量计和配件
Phantoms are shipped with all dosimetry holes filled with blank pins. Pins for TLD chips have recesses at one end measuring 3.2 x 3.2 x 0.9 mm. Pins for TLD rods have 1 mm-diameter holes cross-drilled at the centers of the pins. All pins are 2.5 cm in length (unless otherwise specified).
所有剂量学孔均填充空白针,随货发货。用于TLD芯片上的插针一端设有凹槽,其尺寸为3.2x3.2x0.9毫米。用于TLD杆上的插针则在插针中心处设有直径为1毫米的交叉钻孔。所有插针长度均为2.5厘米(除非另有说明)0
Pins may also be ordered to accommodate various types of OSLD dosimeters. Tissue equivalent plugs specifically machined for TLD chips, TLD rods, TLD bars, TLD cubes, MOSFET detectors, as well as LANDAUER® OSL MicroSTAR® and nanoDot® holders, are also available.
针脚也可订购以适配各种类型的OSLD剂量计。专为TLD芯片、TLD棒、TLD条、TLD立方体、MOSFET探测器以及LANDAUEROSL MicroSTAR和nanoDot支架设计的组织等效插头也可提供。
Materials 材料
All pins and holders are available in tissue or lung-equivalent materials and with 5 mm or 7 mm outer diameter.
所有针和支架均采用组织或肺部等效材料制成,外径为5mm或7mm。

Alderson Radiation Therapy (ART) Phantom
型号 | 描述 |
| Accessories 配件 | |
| ART-10 | Pins with Chip Holder. 0.32 cm x 0.32 cm deep chip cavity. Pins are 2.5 cm in length (unless otherwise specified). Please specify outer diameter of pins: 5 mm or 7 mm. 带芯片夹具的针脚。 0.32厘米X0.32厘米深的芯片腔体。针脚长度为2.5厘米(除非另有说明)。请指定针脚外径:5毫米或7毫米。 |
ART-12 (5 or 7 mm) | Pins with 3 mm Rod Holder. Pins are 2.5 cm in length (unless otherwise specified). Please specify outer diameter of pins: 5 mm or 7 mm. Rods are 1 mm diameter. 带3毫米杆夹的针。 针的长度为2.5厘米(除非另有说明)。请指定针的外径:5毫米或7毫米。杆的直径为1毫米。 |
| ART-15 | Pins with 6 mm Rod Holder. Pins are 7mm outer diameter only, and 2.5 cm in length (unless otherwise specified). Rods are 1 mm diameter. 带6mm杆架的销钉。销钉的外径仅为7mm,长度为2.5cm(除非另有规定)。杆的直径为1毫米。 |
ART-20 (S, L, B) | 5 mm Blank Pins. Outer diameter, solid. Pins are 2.5 cm in length (unless otherwise specified). Please specific material: S – Soft tissue, L – Lung tissue, or B – Bone tissue. 5毫米空白别针。外径,实心。别针的长度为2.5厘米(除非另有说明)。请具体说明材料:S-软组织,L-肺组织,或B-骨组织。 |
ART-21 (S, L, B) | 7 mm Blank Pins. Outer diameter, solid. Pins are 2.5 cm in length (unless otherwise specified). Please specific material: S – Soft tissue, L – Lung tissue, or B – Bone tissue. 7毫米空白别针。外径,实心。别针的长度为2.5厘米(除非另有说明)。请具体说明材料:S-软组织,L-肺组织,或B-骨组织。 |
| ART-22 | Extension Support Rods 延伸支撑杆 |
如需购买或咨询,请联系RSD模体代理商:0755-26435055 或 19129367165(微信同号)
扫一扫,咨询客服微信 